John Deere G Aluminum Radiator

JD 24

New User
This message is a reply to an archived post by FOXG on March 06, 2012 at 20:21:56.
The original subject was "Re: John Deere G Aluminum Radiator".

I know this is off topic of the aluminum radiator but I had a question on your front tires. How did you get those rims on the front? Is that a different hub than on a stock one? I have a John Deere A I'm trying to get those rims and tires for but I can't find them for the stock hubs that are on the tractor..?
 
I made the steering shaft that runs vertical through the front ped including lower block that the new spindles were welded to. Hubs were 5-4.5 trailer hubs you can get almost anywhere.
 
Yes I had the one piece pedestal to but I took the shaft out from the steering gear down to the spindles and made it lighter all the way through. If you need help let me know it's easy.
 
Oh ok. Ya I could use some help just on how you did it exactly. Would really appreciate it.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top