Farmall 560 head

Anonymous-0 · Jun 11, 2014

I have a head off a silver diamond motor... I have a 301 in my 560 what is involved in switching heads . .? What should I run for a carb about 3500 rpm also who has a steel flywheel ? Thanks for your help !

RD560 · Jun 11, 2014

You need all the top end- push rods, rockers arms valve cover etc. You need to check compression with the head and pistons your using. The small chamber really helps bump the compression up. As for the carb, the biggest zenith made might work. I think it flowed 400 cfm, and I"m sure a guy could get more out of it.

Anonymous-0 · Jun 11, 2014

i have a carb off a john deere 7700 combine would that work?.

RD560 · Jun 12, 2014

Yes, that's the one you want.

Anonymous-0 · Jun 13, 2014

If you are running stock manifolds I have the intake you'll need for a big carb.

Anonymous-0 · Jun 13, 2014

What's your head casting number?

Anonymous-0 · Jun 13, 2014

Got any pics ? How much.

Anonymous-0 · Jun 13, 2014

Got any pics ? How much.??? Thanks

Anonymous-0 · Jun 14, 2014

69717-R1

Anonymous-0 · Jun 14, 2014

Ok. That's the one I have. I'm trying to figure out which one is better. I've got the tilt valve head on my bd240 pick up, but it's a daily driver

Farmall 560 head

Anonymous-0

Well-known Member

RD560

Member

Anonymous-0

Well-known Member

RD560

Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Similar threads