460 pto removal

Konnor B

New User
I wanna remove the PTO from my 460 and wondered if all i have to do is pull it out and block the hole off or is there something else i have to do?
 
Nope, thats all you gotta do, make sure you get a shaft out too, about 2 feet long, (-/+) some. cut a piece out drill out holes silicon it up, and bolt it on, Good to go! hope this helps.
 

You need to leave just a stub end of the shaft sticking out with a variable speed 12V motor on the inside for RPM checks. Just kidding, LOL.
 
When you pull the shaft out, make sure you get its coupling too otherwise you got a pretty hefty piece of metal that will be floating around in the bottom of your tranny....
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top