missing threads


Oh I thought you were asking why some idiot would grind the threads off the side of his 11/16" all thread.

Your missing threads are on a Malaysian airliner.
 
If I was you I would watch who I slandered on here . The
11/16 all thread was like that when block was carried to my
shop to be rebuilt. Some that did it may not have my
religious believes on not letigating for slander.
 
Pank your words might make one conclude that you are a sore loser. By the way, tell us the story of how you started your tractor in gear and took out an outhouse .
 
(quoted from post at 19:05:37 03/13/14) Pank your words might make one conclude that you are a sore loser. By the way, tell us the story of how you started your tractor in gear and took out an outhouse .
I am not the one baker called whiny. I was standing beside tractor tractor was pointed parked toward porta johns . I reach up and turn ignition on msd box lights plugs and rear tire eats my side up but no porta johns are harmed. The lesson is dont turn ignition box on with tractor in gear on oxygenated fuel . If rotor button is aligned it could fire as mine did without starter ever being touched.
 
A lot of threads have disappeared including one of
mine. I didn't think I said anything wrong or
slandered anyone but POOF it was axed. I don't post
often and I never will again.
 
(quoted from post at 03:15:45 03/14/14) A lot of threads have disappeared including one of
mine. I didn't think I said anything wrong or
slandered anyone but POOF it was axed. I don't post
often and I never will again.
I wanted to show the pictures of it to a buddy of mine and poof no more .
 
ok, so it almost got you..close enough. any idiot should know that MSD pulses when the power if flipped. It has no more to do with "oxygenated fuel" than it does with the brand of tractor. You sound like a liability to me.

So now you carried the 11/16 all thread block in to someones shop, and the all thread was already there? Sounds pretty inconsistent with the story of how you went a size larger from stock to 11/16...are you believing your own line of BS?
 
And the Darwin award goes to......
a149330.jpg
 
Keep it up guys and this one will get poofed too. Heck, the
normal person will think puting tens of thousands of dollars
into antique tractors to tractor pull, especially with it being a
dying sport is as crazy as using all thread for head studs. I'm
impressed with the heads your designing, but like I said, how
much longer is there going to be a demand for such a
product? I hope you sell them as fast as you can make them
but then again our sport isn't growing any.
 
The only people that have never had a near miss of some sort on a tractor are the ones who have never drove a tractor. Ive seen pictures of them ran off sides of trailers flipped backwards on this site at natpa pulls to beat that .
 
Do the moderators ever post reasons for deleting or
warnings that a thread is turning bad?

I think this could be a better experience if some
could forgive and forget their issues with others.
Harboring hate and discontent for another is not
healthy and keeps a person down. It's not
Christian.
 
(quoted from post at 14:32:13 03/14/14) The only people that have never had a near miss of some sort on a tractor are the ones who have never drove a tractor. Ive seen pictures of them ran off sides of trailers flipped backwards on this site at natpa pulls to beat that .

I don't agree with you on this I grew up on a farm i started operating a tractor at at the age of 6 on dad and grandpas lap i was on them at the age of 10 by my self I am now 46 and have been pullen since 1989 i have not had a near miss because I was taught safety I now have a 6 year old girl and I work on safety with her every day and with the IND. your in you should think safety at all times
 
tempola they shut down the on on the allis site for 24 hours because of the fighting and kicked some of them off the forum all together
 
Pmer,

If everyone went to the modern view....I know they could give reasoning there.....I am a mod on a atv drag site....our site ended up being a payed site due to this kind of junk that goes on on here....that way we have more control plus they loose money when they get banned.chris (mod)on here told me if we all to modern view and get rid of the old view he could change post or delet and give reasoning a lot easier.....I am not shure if this helped with your ? or not
kelly
 
It would seem to me that you would have no reason to fire the ignition switch unless you were intending to start the engine, and if so, wouldn't you already have it spinning before throwing the switch?
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top