respect is earned

blue924.9

Member
since everyone on here always gripes about how respect is earned not given and that kind of stuff, here is my video of the tractor pulling, sorry but i didnt film my competition but i did get a 3rd place, keep in my when you watch the video we have a 250 foot track and gear the sled accordingly
http://www.youtube.com/watch?v=XIh8...54428_176_zpsa0f96e9f.jpg.html?sort=3&o=5


that didnt work like i thought it would
 
ok lets see if this works, here is my video http://www.youtube.com/watch?v=XIh8NixHR6I

and here is my picture proving that a stock tractor can win 1st against hopped up ones

http://s1361.photobucket.com/user/blue9249/media/IMG_20130825_154428_176_zpsa0f96e9f.jpg.html?sort=3&o=5
 
sorry guys but you are going to have to copy and paste the link i dont know why it wont work right :twisted: remember when you watch the video that we run a 250 foot track and gear the sled accordingly, in the video i got third and in the photo at a different pull with almost all of the same tractors as the pull in the video i got 1st, the 3rd was in 3500 pound class and the 1st was in the 4000 pound class, stock allis chalmers wd, as far as we know it has the factory 4 inch bore and stroke and we ran 1st gear
 
It worked just tine for me. On any given day any tractor out there can win with speed limits. Enjoy the sport that is what it is all about.
 
(quoted from post at 11:55:50 10/07/13) Nice pull WD 45,you have pulled before,good job.

thanks for all the replies, figured i would post evidence that i have actually pulled before, that way i can post in the future and not have 12 people tell me that i know nothing and i am full of bs

oh and its a straight wd, no 45 on mine, but i get that all the time lol, and to be honest i like the early wd trans better than the later wd and all wd 45 tranmisisons, the design is stronger (but louder) and it doesnt pop out of gear when it gets wore out
 
Seams like the advice i gave on unofficial allis has been
taken in. Congrats on a first place its feels alot better than
third doesnt it
 
i suppose it does, funny part though is its comin from a guy who awhile ago was the same person on unoffical allis told me it couldnt be done on a stock tractor :wink:
 
i suppose it does, funny part though is its comin from a guy who awhile ago was the same person on unoffical allis told me it couldnt be done on a stock tractor :wink:
 
Sorry to burst you bubble but that happens at every
pull everywhere! Stock out pulling hopped up ones,
bet it dont happen much , how many in that class? 2
probably
 
no there were 14 tractors in that class actually, including one open class tractor that had larger tires than allowed for the stock class that no one cuaght till after the pull. heres the list http://www.ottercreekpullers.com/7-6-13.html

now when you read this remember something, this wasnt the day i got first, but every single tractor on that list and a few more were at the pull the day i got first, you are also lookin at 4000 pound class just to be clear, and you are right, for me beating hopped up tractors doesnt happen much but as you can see i usually do quite well despite powering out in almost every pull
 
ole saying in the south .sun shines on a hogs behind every now and then. I sent him some of my pulling videos for him to study and he learned a few things guys even though it made him mad when he had to eat feathers with the crow.lol
 
no you sent me nothing, and if you would like i can refer all the guys on here to the thread were you discouraged me from tractor pulling and Beat me down with your so called experience, you couldn't even send a video to the video pull off thread so we could see this big bad pulling tractor you talk of, you cant even post a picture of this gleason you brag about all the time, if guys on here want the truth they can go to the allis chalmers website under the pulling section and look for themselves they should just know that the worst of his actions got deleted just the same as he got deleted from the site
 
I sent video you watched it.didnt discouraged you told you
that excuses where for loosers. Most use the excuse of only
placing cause tractor is stock like you were all the time.i
told you if its worth doing it was worth doing what it takes
to win.
 
(quoted from post at 13:55:55 10/10/13) I sent video you watched it.didnt discouraged you told you
that excuses where for loosers. Most use the excuse of only
placing cause tractor is stock like you were all the time.i
told you if its worth doing it was worth doing what it takes
to win.
for those of you who are lost, go to the allis chalmers forum and search for the thread titled well plinko here you go pics (and maybe vids) and all will be explained. i would post a link but the site wont let me, calling it spam
 
(quoted from post at 14:13:19 10/11/13)
for those of you who are lost, go to the allis chalmers forum and search for the thread titled well plinko here you go pics (and maybe vids) and all will be explained. i would post a link but the site wont let me, calling it spam

Tried searching your posts rather than dig through pages of Allis, and found nothing. Did you go by a different name

Is it just me or is there no good way to do a search for something on these forums?
 
(quoted from post at 10:20:22 10/11/13)
(quoted from post at 14:13:19 10/11/13)
for those of you who are lost, go to the allis chalmers forum and search for the thread titled well plinko here you go pics (and maybe vids) and all will be explained. i would post a link but the site wont let me, calling it spam

Tried searching your posts rather than dig through pages of Allis, and found nothing. Did you go by a different name

Is it just me or is there no good way to do a search for something on these forums?
well the search function on the allis forum is shaky at best but the thread is on page 7 on the pulling forum about halfway down the page, no i didnt go by a different name on the allis forum
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top