Tater

Member
I would like to watch some big cube "A" JD pulling because some can compete with the G JD. And like others show the whole class. thanks.Just a thought.
 
I know of a guy that has a high dollar built G that he pulls with. He just bought a unstyled A that he is going to build. He told me that he was going to put G pistons in it. I dont know if it can be done but he has his mind set on it.
 
I'm in the process of re doing one right now. I was running 6.75 by 9 for 7 years. Crank has some cracks so I counter ground them out and welded journal back up and turned it into 9.5. Makes 680 cubes. Going to try one of Rays new flat heads on it, Should have it weighing In at 3600 with me on it w/ 16.9-38's on aluminums. Planning on having it up and running again for the Corunna pull. I'll get some videos
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top