V8 tractor pulls

778899

Member
Are there many V8 tractor pulls in Mn,Ia,Mo,SD,,WI.?Please let me know what you guys know,thanks.Looking for some places to go that have a class or two.
 
We pull alot in Central OH, NE OH, and PA. Recently alot of the older BB Chevy and Caddy Powered tractors from over here have been bought by some guys out that way. Not sure of what club they are with but did hear they were trying to get something started.
 
MATPA (Central MO) has 5000 and 5500lb classes for small blocks with 360cid limit. There is an A Class with open rpms and a B Class limited to 6000 rpm by MSD chip. 18.4x38 (cut tires allowed). Stock wheelbase. See schedule at www.pullwithMATPA.com
 
In Iowa
Check out website SWIATP South west Iowa.
ICAP in central to western Iowa
Iowa State Fair.
All have the same rules.
4500lbs. to 6500lbs.
410 cu. Small Block
505 Big Block
Both around 5000 rpm.
MSD Box with chip
18.4 X 38 tires any cut and rim.
1957 and older tractor
 
We have several V8 class pulls in North Central Nebraska and Winner SD. as part of the Borderline Pullers. We have 10 total pulls this year,but not all have V8"s. Most are 350 Chevys,1 348 IH in a Farmall M. E-mail me if interested and I can get you a list of locations and dates. Our first pull is Ainsworth Nebraska on May 25.
 
Mcintire, IA across the border from Austin MN. June 16th & August 17th. No speed limits in all classes from Farmstock to Outlaw on the August pull.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top