Dead Weight Pulling Sled

AOOC

Member
I want to build a dead weight pulling sled and am looking for some plans or a couple of good photos of a sled to get me started. Dimensions and materials used to build a sled and how you operate one of your pulls would also be appreciated. I have seen some sleds on the forum, but wanted a little more detail. If someone is interested in selling a sled, let me know, perhaps we could come to terms. (Penna, Va, Md, West Va, Ohio area prefered) Thanks for any input.
 
Aooc,,,,,,,give me to weekend ,i get some pic one i built,,, park had one out thin plate an well casing on the ends,,flexed nn rolled ,with the ground contour, could hold 15 barrels cement, we built one in fab shop..kinda was over kill..butbut once we got it on the trac,,we could stop, high hp.tractor in 7500lbs,,, could go high weight ..but ,the park, only pulls 3500 up to 7500lbs,, sled works real well,,,like i said this sled was over killed,,,lol,, but steel was donated ,an my time an a buddie,did allfittin an welding,,, i get you some pic, for ya, send me a message,pplowboy@gmail,get me a no. I be glad help yaya
 
Our sled is 8' x 12' with 2 -22 1/2 deg bends to make a 45 on each end. 1/2 " plate for the pan and has been pulling for 23yrs with lots more to go.
 
We pulled one made from truck frame maybe 6 peaces wide both ends angled up adjustable chain holes both ends.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top