|Tractor Pulling Discussion Forum|
Re: Bone stock class - a good idea? Club considering over USAP.
[Show Entire Topic]
[Show Entire Topic]
[Return to Forum]
[Add a Reply]
Our club went through this a couple of years ago,and the rules we adopted seem to be working well for us and have helped us recruit new members: In a nut shell; Stock appearing,no parts stripping to save weight, 3.0 mph, hitch can be fabricated but must mimic stock dimensions,fully functioning governor that can not be over-ridden,10% over on rpms, no cut tires & limited to one size over stock. Electrical enhancements like 12V alternator,Pertronix,etc. is allowed. Factory aircleaner must be hooked up. We allow any type of properly secured weights...several of our members even use iron barbell weights. I believe that policing hitches, tires , & speed are the keys, as all can be easily checked. A RULE THAT CAN NOT BE ENFORCED IS WORSE THAN NO RULE! Our biggest point of discussion for this type of class was...what is the best speed limit, but by allowing slightly bigger tires and a few extra rpms we found that 3.0 mph works great for us. Even though some 2 cylinder guys would still prefer it just a tad slower they are competitive.Good Luck!
|Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]|
| Copyright © 1997-2014 Yesterday's Tractor Co.|
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters