oliver 310 carb linkage

bobidan · Jan 18, 2013

im putting a 310 in an 88 and it doesnt have any of the carb to gov linkage anybody got a pic of it or can tell me how the gov hooks up thanks

chucksoliver77 · Jan 18, 2013

bobiden, if you have the governor and linkage from the 88, just use that and it will fit and work fine with a little stiffer spring, that's what I did when I had a 310 in my 77. Chuck

bobidan · Jan 18, 2013

the 88 engine is long gone anybody got a pic i can look at or any info on how it should be connected

chucksoliver77 · Jan 18, 2013

(quoted from post at 05:50:03 01/19/13) the 88 engine is long gone anybody got a pic i can look at or any info on how it should be connected

here is a pic. of the linkage on my 77 if you go that way. Chuck

S.D.L. · Jan 18, 2013

Here you go Aaron, this should help if you just talking about the original governor linkage on the motor. This is on a power unit obviously, but same deal basically.

oliver 310 carb linkage

bobidan

Member

chucksoliver77

Well-known Member

bobidan

Member

chucksoliver77

Well-known Member

S.D.L.

Member

Similar threads