(800) 853-2651
SHOP NOW

BN Puller ??

I pull a Super A once in a while and it is a little hard to get enough weight on the right side.
I use a belly bracket and its all on the right side.
 
Leave it a BN. I run a B and A farmall the A has the 153 motor and we are having traction issues. My B does pretty good but being over 250lbs moving weight to the left wheel is a challenge. If I had the parts I would change it to a BN and make the A a BN also. We have probably 10-15 BN's pulling here.
 
my BN pulls fine just the way it is!


Cliff S
a94828.jpg
 
We had a wheel weight on the left side which was enough to balance the BN when I was younger. We took it off when we put the 16.9x24s on to be able to still get into 2500lbs class. We pull from 2500-4000 lbs classes. We had a set of 12.4x36s on the back for a pulling season but the stock first gear in a BN is pretty tall which made it hard to lug down so low on the rpms to stay under 3mph for the horn class around home. The 36s were alot of fun in the open classes tho.
a94834.jpg
 
Vic

With a little bit of weight on the left side there balanced then there like any other tractor!

a lot easier than moving the clutch pedal and the brake pedals around and the steering to go with a seat on these little tractors!

Vic you seen my BN pull and there good pullers in 2500 to 4000 With some additional Power in a div 2 non cut class!

Hope my BN turns RED instead of Rust this summer!

Cliff S
 
Trsvis

I will be there at lease with the Su C but if I bring any other tractor a friend of mine will run it!

It won't be the BN but maybe my C or VAC!

Cliff S
 
You must log in or register to reply here.

Similar threads

K
Farmall bn flywheel removal
Replies
10
Views
374
Janicholson
Janicholson
K
Farmall bn no spark
Replies
9
Views
477
Kpoke
K
S
sickle bar mower identity
Replies
9
Views
447
thomas h kwapiszeski
T
C
Putting a woods L59 belly mower on a farmall BN
Replies
6
Views
424
grandpa Love
grandpa Love
I
Does my engine need overhauled?
Replies
18
Views
1K
Geo-TH,In
Geo-TH,In
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top