|
| |
| Tractor Pulling Discussion Forum |
Topic: need more 720 gas HP
[Return to Forum]
| Author |
[Modern View]
|
| 720deere puller
12-16-2012 17:36:49
12.180.94.15
|
Needing contact info or any info on increasing hp on a stock 720 gas, pulling in 8500 & 9500lb. classes. Any help would be greatly appreciated.
|
|
|
| dblair
12-17-2012 13:35:29
67.172.201.147
|
|
Re: need more 720 gas HP in reply to 720deere puller, 12-16-2012 17:36:49
|
|
| there was a post on this forum a couple years ago where a guy said he went to 77 hp with the addition of diesel pistons . take it for what it's worth could just be hear say . that's a 22 hp jump from stock .
|
|
|
| buickanddeere
12-18-2012 10:27:41
184.151.63.230
|
|
Re: need more 720 gas HP in reply to dblair, 12-17-2012 13:35:29
|
|
| Maybe onto something? The gas and diesel used the same 6-3/8 inch stroke. The diesel bore is 125 thou larger at 6-1/8".
Must have required some high octane fuel, couldn't even guess the compression ratio.
720AF 4.9 to 1, 720gas 6.14 to 1 and 720LP 7.94 to 1.
Even the LP pistons are an 29% ratio increase over the gas.
|
|
|
| buickanddeere
12-17-2012 13:20:19
184.151.61.212
|
|
Re: need more 720 gas HP in reply to 720deere puller, 12-16-2012 17:36:49
|
|
| Higher compression. Re-ground camshaft. Port and manifold matching. Blend and smooth casting flash and sharp edges from the inside of the ports. A professional 5 angle valve job by a race engine shop, not a valve job by Bubba . Dry air cleaner element . Propane intake and exhaust manifolds.
Will make an easy 75HP at pto rpm.
|
|
|
| Josh Blackburn
12-16-2012 18:41:45
174.252.227.194
|
|
Re: need more 720 gas HP in reply to 720deere puller, 12-16-2012 17:36:49
|
|
| How much power are you looking for. I have a real nice set of lp pistons. They will be a quick and easy 10 hp they Look brand new or can do something more. 9892775366
|
|
|
| Lee DePew
12-20-2012 15:05:37
67.242.212.159
|
|
Re: need more 720 gas HP in reply to Josh Blackburn, 12-16-2012 18:41:45
|
|
| how big of a stroker crankshaft would fit in a 720 gas was a propane tractor converted
|
|
|
| jd b puller
12-20-2012 15:14:36
65.190.135.248
|
|
Re: need more 720 gas HP in reply to Lee DePew, 12-20-2012 15:05:37
|
|
| | Lee, as far as I know it's the same as a G/70 as far as how much you CAN stroke it. Stroke + journal = 13.375" I'm sure someone has gone bigger, that's worked for me.
|
|
|
| Lee DePew
12-20-2012 15:31:19
67.242.212.159
|
|
Re: need more 720 gas HP in reply to jd b puller, 12-20-2012 15:14:36
|
|
|
thank you for the info greatly appreciated!!!!!
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
