(800) 853-2651
SHOP NOW

Flywheel

A

Anonymous-0

Well-known Member
Will a 70 john deere diesel flywheel work on a 720 diesel john deere? My 720 has play in the flywheel and was wondered if I could use anything to shim it up and make it tight. The person before me must have run it loose. I would like to use what I have Thanks again for any help.
 
Thanks Mike I know where I can get one off of a 70 that has been sitting for a long time and wanted to try and use that flywheel.
 
Just looked at my number on my flywheel and it was F1913R was that still for the 720 or could someone have put the wrong flywheel on it?
 
Install a taper-loc flywheel.
Some time or other some slob worked on the tractor without a torque wrench. They either under torqued the flywheel bolts and let the flywheel slide. Or they over torqued the flywheel bolts and stretched the bolts which reduced the clamping force.And the flywheel slid.
So for the lack of of a few minutes and some care. The crank and flywheel are ruined.
 
It wont work for long if at all. Yhe crank is worn now so a taperloc is the only solution short of an nos crank & perfect flywheel.
 
You must log in or register to reply here.

Similar threads

T
oliver 88 pistons sleeves
Replies
5
Views
681
VicS
V
J
Tractor questions
Replies
5
Views
461
Leroy
L
B
John Deere 70 Flywheel Removal Help
Replies
11
Views
565
buck2013
B
J
John Deere 2010 Crawler diesel Main bearings
Replies
5
Views
469
Lavoy
L
D
Prevent clutch disk sticking to pressure plate/flywheel
Replies
18
Views
694
Fixingfarmer
Fixingfarmer
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top