Re: G705 in reply to Jon Aller, 12-14-2012 06:35:25
Why? Is it the adjusters above the axle? Mine are too. Thats silly if that is all thats wrong. Do not believe that is a safety issue in my opinion if built strong enough and right. If this is who I think it is, this tractor and setup is just fine!
it's also silly to have to walk around the pull the rest of the day with squishy pants because the hitch broke and the front end stood straight up! That hitch could easily be converted to use adjuster bolts above and below the drawbar like the U hitch pictured below, pulling off the Farmall wishbone is another accident waiting to happen, NE Nebraska Pullers won't let you pull off of it, atleast not at Norfolk
Re: G705 in reply to Jon Aller, 12-14-2012 12:25:38
Quoting Removed, click Modern View to see
Look at the geometry. The lower attach points are behind the hitch point so a lifting chain has no leverage against those adjusters, which are of very adequate size. I have seen adjusters bent and front tires 8 feet in the air too, but the hitch point was a foot behind the support point and the supports were 1/3 the size of the ones in the picture. This same guy that went straight up had nice retractable wheelie bars and he had them retracted.
Fast Shipping! Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.