| Author |
[Modern View]
|
| 1UpFabrication
12-07-2012 18:53:37
68.34.196.167
|
 We are running a sale on our Lightweight (32lb.) and Lowered Farmall pedestals...all orders that are placed before Dec.31st will be $275+shipping and they normally run $300+shipping you can reach us at (423) 736-4080 These pedestals are setup to run 5x4.5 aluminum wheels and have been tested on a Super M with 1,000lb hanging on the front weight bar!!!
|
|
|
|
| Blinko
12-10-2012 15:53:40
174.254.210.168
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to 1UpFabrication, 12-07-2012 18:53:37
|
|
| Where are you located? Just checking to see if you are in a general area of me where I could pick one up and save the shipping.
|
|
|
| 1UpFabrication
12-11-2012 13:05:04
174.252.178.163
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to Blinko, 12-10-2012 15:53:40
|
|
| Send me 285 and I'll pay the shipping (if ordered by 12-15-12)!!!
|
|
|
| 1UpFabrication
12-11-2012 13:05:03
174.252.178.163
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to Blinko, 12-10-2012 15:53:40
|
|
| Send me 285 and I'll pay the shipping (if ordered by 12-15-12)!!!
|
|
|
| north puller
12-09-2012 13:03:44
74.198.9.115
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to 1UpFabrication, 12-07-2012 18:53:37
|
|
| hey 1up, i see that the factory pedistals dont drop down square, but are angled back slightly. Do your pedistals match that angle, or does it make any difference droping them down square?
|
|
|
| 1UpFabrication
12-09-2012 18:24:56
68.34.196.167
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to north puller, 12-09-2012 13:03:44
|
|
| Our pedestals drop straight down, it makes no difference in the steering or strength of the tractor...if anything it would be stronger as with the factory pedestals already angled back it takes less force to bend or break them on back...
|
|
|
| showdown
12-08-2012 16:39:49
75.251.102.142
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to 1UpFabrication, 12-07-2012 18:53:37
|
|
| If I had a Farmall I"d have one Nice looking piece of work. Looks factory done, GREAT JOB.
|
|
|
| 1UpFabrication
12-09-2012 18:25:47
68.34.196.167
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to showdown, 12-08-2012 16:39:49
|
|
| 1939
12-08-2012 07:11:15
198.228.228.168
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to 1UpFabrication, 12-07-2012 18:53:37
|
|
| What will be the outcome of a hard landing with 1000lbs on the front ouch.Thanks
|
|
|
| RICHB
12-08-2012 11:26:54
208.105.96.178
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to 1939, 12-08-2012 07:11:15
|
|
| Then you need driving lessons,Almost all the time that is preventable in antique pulling,a open antique tractor should have a wide front.
|
|
|
| 1UpFabrication
12-08-2012 07:17:50
68.34.196.167
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to 1939, 12-08-2012 07:11:15
|
|
| These pedestals have landed hard several times with 1,000 out front and have NEVER had any issues!! The design and build of these are very durable.
|
|
|
| Tm Yates
12-08-2012 04:05:47
96.240.171.59
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to 1UpFabrication, 12-07-2012 18:53:37
|
|
| Saw these in person in Tunica, very nice piece of work.
|
|
|
| 1UpFabrication
12-08-2012 07:25:15
68.34.196.167
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to Tm Yates, 12-08-2012 04:05:47
|
|
| Thank You! The tractor with these in Tunica is the one pictured with one under it. We work hard to put out clean cut products as well durable long lasting ones.
|
|
|
| colekicker
12-07-2012 23:43:00
12.181.125.191
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to 1UpFabrication, 12-07-2012 18:53:37
|
|
| Can you post a picture of one on a tractor so you can see what it looks like on the tractor with tires? Wondering about clearance and all. Thanks
|
|
|
| 1UpFabrication
12-08-2012 07:13:08
68.34.196.167
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to colekicker, 12-07-2012 23:43:00
|
|
|  This tractor pictured has one of our pedestals under it and was also the one that tested these with 1,000 lb hanging out front. The clearance that we had on this tractor was roughly 1" to 1.25"
|
|
|
| Underdog Moline
12-07-2012 20:32:16
24.159.240.250
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to 1UpFabrication, 12-07-2012 18:53:37
|
|
| Wondering what is the total weight savings of just the pedestal?
|
|
|
| 1UpFabrication
12-08-2012 07:22:18
68.34.196.167
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to Underdog Moline, 12-07-2012 20:32:16
|
|
| I am not sure of the actual weight of the factory pedestals without the tires on them but I know our lightweight pedestals complete with tires, wheels, hubs, etc (the complete lower), weighs 150 less of that of the same in factory!!Ours weigh 32lb. complete as pictured
|
|
|
| RICHB
12-08-2012 11:29:21
208.105.96.178
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to 1UpFabrication, 12-08-2012 07:22:18
|
|
| Nice looking set up,If I wasn't in the process of having one built I would be real interested.Thanks for posting!
|
|
|
| 1UpFabrication
12-08-2012 12:21:49
68.34.196.167
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to RICHB, 12-08-2012 11:29:21
|
|
| unknownM
12-11-2012 14:18:46
98.17.19.48
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to 1UpFabrication, 12-08-2012 12:21:49
|
|
| what size of front tires are on that tractor in the picture?
|
|
|
| 1UpFabrication
12-11-2012 15:48:46
68.34.196.167
|
|
Re: Farmall Lowered and Lightweight Pedestals in reply to unknownM, 12-11-2012 14:18:46
|
|
| The owner of the Super M pictured says the tires that are on the tractor are 15x4...hope that helps...
|
|
|
