Anonymous-0

Well-known Member
I am looking for information on some B john deere rods are they the same length pin to pin and are the crank pins the same size unstyle and styled and what is the length pin to pin. Thanks
 

Guess you will need to ask again...or..

You can contact JDBPuller..(Ray)..he makes New Billitt Rods, etc..ought to know (and have) anything you want, or he will Make it..

Ron..
 
Hope this cut and paste job works....Sorry I"m not very good at "linking" or cutting and pasting... But Earl from Illinois had a great answer to 36A for this a few years back

36 A
06-01-2005 05:17:04
204.73.103.253



Report to Moderator

What is the inside mesurement on the big end of a late model B connecting rod with out the bearing. Thanks
[Reply] [No Email]
Earl-IL
06-02-2005 18:57:37
205.188.116.204



Report to Moderator
Re: WTW B connecting rods in reply to 36 A, 06-01-2005 05:17:04
36A, My books shows center to center 10.500 Housing bore 2.900--2.901. pin dia-1.416- 1.417 100lb. torque # 2180 cp federal rod brg with journal dia of 2.749-2.750 oil clearance .001-.0045 bearing width is 1.485 Earl In Illinois
[Reply] [No Email]
36 A
06-02-2005 19:45:02
204.73.103.253



Report to Moderator
Re: WTW B connecting rods in reply to Earl-IL, 06-02-2005 18:57:37
Thanks Earl
[Reply] [No Email]
 
I have no facts/#'s but the unstyled have smaller bearing size so you can offset grind the crank for a tiny gain in stroke/compression.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top