Author	[Modern View]
Bud Kaiser 10-23-2012 11:15:13 75.0.231.178 Report to Moderator	What hp could be gained with a custom ground cam and pistons? Was wanting to run highest compression on premium gas?I am also would like yalls opion on names of quality builders and contact numbers. [Reply]   [No Email]
north puller 10-23-2012 11:58:43 68.171.231.83 Report to Moderator	Re: Best cam in reply to Bud Kaiser, 10-23-2012 11:15:13   You have to understand what a cam can and can't do. You can alter the torque curve with a can to suit your needs. You can have a long flat curve, with less peek torque, or a short peeky curve, with a higher peek number. You can also move the rpm range up or down where peek torque happens. You can add lift, duration, or both to compliment more compression or displacement. Talk to Baker and talk to Sonny at Bullit cams. Both will be able to explain how their cam will effect your motor. [Reply]  [No Email]
Shad Ridenour 10-23-2012 11:45:02 50.51.180.49 Report to Moderator	Re: Best cam in reply to Bud Kaiser, 10-23-2012 11:15:13   You can't go wrong with Gary Baker (734)678-9688 or Paul Marlatt (765) 938-2227 [Reply]  [No Email]
buickanddeere 10-23-2012 11:39:41 184.151.63.145 Report to Moderator	Re: Best cam in reply to Bud Kaiser, 10-23-2012 11:15:13   1400,2100 or 2800rpm? [Reply]  [No Email]
Bud Kaiser 10-23-2012 11:23:46 75.0.231.178 Report to Moderator	Re: Best cam in reply to Bud Kaiser, 10-23-2012 11:15:13   oops.forgot to mention this is on farmall 450 [Reply]  [No Email]