Author	[Modern View]
muddymassey 10-18-2012 09:33:47 71.28.137.180 Report to Moderator	Hi there, Planning on building my 260 for pulling. Looking for sources for engine buliders. I am planning on regrinding the cam and getting head work. Anyone know reliable business? Spoke with Goldsburg Performance, seems to really know his stuff. However he seems hard to get a hold of. Emailed and called, and have not gotten a response in two weeks. Thanks [Reply]   [No Email]
6pack 10-18-2012 18:44:27 66.178.249.90 Report to Moderator	Re: Masey 44 Engine builders in reply to Christopher S., 10-18-2012 09:33:47   Quoting Removed, click Modern View to see Well said Massey44, any reputable machine shop can do the work, just have to do your homework and give them your specs and money [Reply]  [No Email]
massey44 10-18-2012 18:33:30 71.49.76.203 Report to Moderator	Re: Masey 44 Engine builders in reply to muddymassey, 10-18-2012 09:33:47   If you have a good machine shop near by just get some custom sleeves cut, murphys rods work well for clearence, and some custom pistons work well also why make something work that was put together years ago when your going together any engine builder can build what you want, doesn't have to be a tractor builder a degree wheel and a flow bench does wonders, along with the machine shop around where I'm from money gets your motor built. Mine is 6.5 X 4.5 still running water in the block you can go bigger pretty easy. [Reply]  [No Email]
OldMoIron 10-18-2012 17:33:30 71.1.126.144 Report to Moderator	Re: Masey 44 Engine builders in reply to muddymassey, 10-18-2012 09:33:47   I also emailed about 2 weeks ago. . no reply [Reply]  [No Email]
Goldsburg 10-27-2012 09:52:03 65.29.146.90 Report to Moderator	Re: Masey 44 Engine builders in reply to OldMoIron, 10-18-2012 17:33:30   Sorry guys for being MIA, I have been somewhat under the weather... Thanks, Goldsburg [Reply]  [No Email]