Author	[Modern View]
big time farmall 10-16-2012 13:52:11 68.171.231.84 Report to Moderator	Looking for pics of a lightened front fuel tank support or custom built support for a farmall m. Would like to keep both gauges. [Reply]   [No Email]
lmbky 10-18-2012 18:56:09 76.182.159.233 Report to Moderator	Re: farmall m fuel tank support in reply to big time farmall, 10-16-2012 13:52:11   built two at about 4# apiece out of leftover metal arond shop ,even used pipe for steering shafts,home made engine mnts loose u another 20# [Reply]  [No Email]
jhellemn 10-17-2012 20:05:12 76.1.0.249 Report to Moderator	Re: farmall m fuel tank support in reply to larryanderson, 10-16-2012 13:52:11   Quoting Removed, click Modern View to see Definitely interested in seeing this too! [Reply]  [No Email]
John 37A 10-17-2012 16:46:56 69.223.128.231 Report to Moderator	Re: farmall m fuel tank support in reply to Jimmy pine, 10-16-2012 13:52:11   Mine weighs in at less than 5 lbs and incorporates the gauges. Will get you pics soon. [Reply]  [No Email]
big time farmall 10-17-2012 19:15:24 68.171.231.80 Report to Moderator	Re: farmall m fuel tank support in reply to John 37A, 10-17-2012 16:46:56   Thanks. I'll be waiting. Post here or email. Whichever you like. [Reply]  [No Email]
BDADDYJ3 10-17-2012 13:00:51 75.246.183.84 Report to Moderator	Re: farmall m fuel tank support in reply to big time farmall, 10-16-2012 13:52:11   I HAVE ONE I AM IN SOUTH CAROLINA PHONE 843-339 8976 [Reply]  [No Email]
LarryM 10-16-2012 20:17:05 76.208.67.203 Report to Moderator	Re: farmall m fuel tank support in reply to big time farmall, 10-16-2012 13:52:11   How lightened? The 1939 through 40-41? had a pressed steel support versus the cast iron one that they had later tractors. A pressed steel one off a W6 could be made to work. I have one off a W6 I would par with. [Reply]  [No Email]
big time farmall 10-17-2012 13:01:22 68.171.231.84 Report to Moderator	Re: farmall m fuel tank support in reply to LarryM, 10-16-2012 20:17:05   Looking for ideas on a custom made one. I would somehow have to add a steering shaft support to a W6 tank mount. [Reply]  [No Email]
LarryM 10-17-2012 14:06:56 146.151.183.162 Report to Moderator	Re: farmall m fuel tank support in reply to big time farmall, 10-17-2012 13:01:22   Yes - It would take some customization. [Reply]  [No Email]
John 37A 10-16-2012 15:55:33 69.223.128.231 Report to Moderator	Re: farmall m fuel tank support in reply to jrf, 10-16-2012 13:52:11   I made one out of 3/16 flat steel. Works very nicely and weighs just a few lbs. I'll get some pics up soon. [Reply]  [No Email]
m manley 10-17-2012 20:07:55 216.18.254.106 Report to Moderator	Re: farmall m fuel tank support in reply to John 37A, 10-16-2012 15:55:33   I Would also like to see this ! I Have cast iron on my M LIKE TO LIGHTEN!e-mail is open [Reply]  [No Email]
big time farmall 10-16-2012 17:09:13 68.171.231.82 Report to Moderator	Re: farmall m fuel tank support in reply to John 37A, 10-16-2012 15:55:33   Thanks. Want to see how you did the gauges and steering shaft support. [Reply]  [No Email]
baldwin racing 10-19-2012 01:17:54 74.79.154.169 Report to Moderator	Re: farmall m fuel tank support in reply to big time farmall, 10-16-2012 17:09:13   you can lighten the stock er by grinding or cutting out the center stuff and just having the square hollow....or make one like said above...use light weight steel and use light angle just taper it down the farther it goes out to were bolts go threw tank....if your that far take alum or light steel bearing support and intall new brearing and use chromoly tubing you can buy the unaversals and everything you need to make you own steering shaft running down threw also.... kelly [Reply]  [No Email]