carb question

Anonymous-0 · Nov 11, 2010

I've got a MS usx-37 carb on a 310 Oliver motor. I was going to send it to Motec, but he said that the carb is junk and that he wouldn't touch it. Any suggestions?

james rumph · Nov 11, 2010

For my own sence of knowing why is it junk ?

Anonymous-0 · Nov 11, 2010

I have a usx-21 . That is hard to keep tweeked in tune . I have taken it off several times but it always finds its way back on the tractor . 314 cfm that it flows is hard to beat unles you go to a stromberg from a plane, tank or train

chucksoliver77 · Nov 11, 2010

i've had one on my 77 for the past 8 years and it has been great. the only mod i did was to enlarge the inlet valve to give it more gas for high rpms for tractor pulling. when adjusted right it makes good power and good fuel economy. last saturday i plowed for 5 hours pulling 3-14s in 5th gear and used 9 gallons of gas. so in my opinion its a good carb. chuck

Anonymous-0 · Nov 11, 2010

Thanks guys. I think Im gonna stick with it unless something bad happens. Thanks for the help.

Anonymous-0 · Nov 12, 2010

Chuck can you please email me when you have a chance I have a question!

Thanks

chucksoliver77 · Nov 12, 2010

pa puller call me @ 973-903-3583, chuck

carb question

Anonymous-0

Well-known Member

james rumph

Member

Anonymous-0

Well-known Member

chucksoliver77

Well-known Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

chucksoliver77

Well-known Member

Similar threads