Ultradog MN
Well-known Member
- Location
- Twin Cities
Going to shoot some Tisco enamel this
afternoon. Will use my usual recipe of
paint, hardener and lacquer thinner.
Am going to shoot it in a corner of the
shop that I have temporarily walled off
and heated to about 75 degrees with an
electric heater. Will pull the heater out
while I shoot but put it back in there
afterwards.
I don't want to heat it forever so
afterwards the temp will drop back down
to about 25 degrees. How long should I
leave the heat on and how long afterwards
to cure?
Thanks.
afternoon. Will use my usual recipe of
paint, hardener and lacquer thinner.
Am going to shoot it in a corner of the
shop that I have temporarily walled off
and heated to about 75 degrees with an
electric heater. Will pull the heater out
while I shoot but put it back in there
afterwards.
I don't want to heat it forever so
afterwards the temp will drop back down
to about 25 degrees. How long should I
leave the heat on and how long afterwards
to cure?
Thanks.