I tried an electrolysis tank last night. Lug nuts look the same this am...rusty and a bit of ford red paint. I used a tablespoon of lye per gallon. Rebar for the positive side and hanging lug nuts off rebar on some electric fence wire. I can use 10 amp setting on 6V and 12V and each only pull about an amp. I tried moving the parts closer to the positive rebar piece this am and seemed like it may have bumped up to 2 amps...or 1 1/2. How long should this take? I was expecting good change this am.
I have some BORAX and could try that too and a lot of people like the sodium carbonate (washing soda) but my friend said lye would take off grease and paint.
Any thoughts on this? How to improve it and how long should it take? Thanks
I have some BORAX and could try that too and a lot of people like the sodium carbonate (washing soda) but my friend said lye would take off grease and paint.
Any thoughts on this? How to improve it and how long should it take? Thanks