Preparing to paint an F-12. Bought the turbine sprayer a few months ago and been testing and making samples for a few weeks.
Here are the details:
Painting in a conditioned space 72 degrees
Using PPG MTK acrylic urethane
Using the slowest reducer I can get
Using the slowest hardener I can get
I have mixed per instructions 4:1:1
I have added 1/2 more reducer and tried it
First coat on samples goes on well. the second coat seems to want to have a small orange peel. It's not terrible and on hoods, tank I can sand and buff and be fine. It's those little pieces that I will not be able to sand and buff.
Any advice or help is appreciated
Here are the details:
Painting in a conditioned space 72 degrees
Using PPG MTK acrylic urethane
Using the slowest reducer I can get
Using the slowest hardener I can get
I have mixed per instructions 4:1:1
I have added 1/2 more reducer and tried it
First coat on samples goes on well. the second coat seems to want to have a small orange peel. It's not terrible and on hoods, tank I can sand and buff and be fine. It's those little pieces that I will not be able to sand and buff.
Any advice or help is appreciated