(800) 853-2651
SHOP NOW

Tractor Supply Majic spray paint

K

kossuth

Member
Consider yourself warned... Do not waste your time with this epic product failure. Aside from the fact that out of the 3 cans of the stuff that I have bought, all of them have had some issue with the spray nozzle. On the first can I was able to resolve the issue. The second can I was not and had to return it. This third can just sprayed in a stream vs a mist. Thank goodness a run isn't going to ruin my day here but you get the idea.

This product does not dry quickly either and is still tacky 8+ hours after applied. Yes it was applied properly. You have been warned.
 
You are so right. Absolutely the worst paint product
I have ever used. I always had good results with
Valspar paint this Majic paint is a poor
replacment.I will not be using any more of it
 
it is an alkyd based industrial enamel. it is made from soybeans. for a low cost implement paint, shoot it from a spray gun and use the catalyst/hardener. it is what it is.
 
I have used at least ten gallon of it. Probly more. I have never had those problems but I do use the hardener. Fading is the biggest problem. Also not a good match to what it is labeled for.
Oliver and Allis Chalmers are the two main colors I use but have used one gallon of IH red. I use the John Deere yellow as a tint to bring the Oliver and the Allis Chalmers closer to the proper colors. Thinning properly and straining it well should make it spray consistent. Not the best paint for sure but a cheap way to keep rust away on outside stored equipment.
 
I agree the paint is bad. So, does anyone know where you can get Valspar Restoration paint which I found great. I can find a source.
 
I painted a trailer with chassis saver and then topcoated it with that tsc paint and it still wasn"t dry the next day even with hardener. I only use imron or urethane paint now any implement paint is a waste in my opionion.
 
Go to what you use for a search engine and type in Valspar paint dealer locater once in their site they will have a place to search for dealers in your area.
 
(quoted from post at 19:49:50 10/08/13) Go to what you use for a search engine and type in Valspar paint dealer locater once in their site they will have a place to search for dealers in your area.
Click to expand...

Valspar has a very broad range of paint products you still need to pick the quality that you want out of their line.
 
If he finds a Valspar dealer they should be able to get him what he wants or knows a dealer that stocks it.
 
I guess your right. I have not tried their rattle cans. I bought a Ford gray a while back to do a breather grill but have not popped the lid yet.
 
(quoted from post at 12:33:52 10/09/13) I guess your right. I have not tried their rattle cans. I bought a Ford gray a while back to do a breather grill but have not popped the lid yet.
Click to expand...

Dick, What model Ford do you have?
 
Majic paint is also know as "super run and drip"

Yes, it does not cover well and is just too thin. Fading, yes. Farm King stores, Farm and Home supply carry it...
just not a good product.

I have had good result with VanSickle paint. Have done some CASE tractors with it and a JD corn planter(two row) Is hard to find is the problem. Orschlein farm stores carry Van Sickle.
Glad to learn about the Valspar........
 
There is a video on you tube. A guy painting a 841 Ford with magic paint. he says you have to wait 24hrs between coats.

I haven"t tried any and don"t plan too. Van sickle paint is available from nnalert.com. They sell it under a different name, but Van Sickle made it.

van sickle has two colors I"ve found that are no where near the correct color. One is AC persan orange ( it"s too light) and the other is the Ford red/orange. ( it"s brown!)
 
Used lots of Van Sickle on my "H", went on perfect, smooth, glossy, no runs no drips no errors, then over a few months sitting inside the barn, in the shade, it all developed a nice white film. Never again.
 
You must log in or register to reply here.

Similar threads

D
Stuck valve options?
2
Replies
36
Views
939
Hobo,NC
Hobo,NC
J
Pressure pot sprayer
Replies
4
Views
359
Stephen Newell
S
C
WD with Drive Train Problem Follow Up 5/31/2021
Replies
2
Views
503
cleddy
C
N
Hard Starting 710 Farm Tractor (202 Engine)
Replies
4
Views
576
Dieseltech
D
E
Unfortunate issues today with my AC B I need help
Replies
6
Views
831
jimtrs
J
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top