bare metal

Jr. Roby · Oct 27, 2012

down to bare metal. now what?

CNKS · Oct 27, 2012

Sheet metal? Sanded or chemically stripped? Any rust pits? If pits, kill the rust with Pickex 20. If chemically stripped sand with 150-180 grit, fill the dents with body filler, clean metal thoroughly with wax and grease remover, use epoxy primer, then a sandable surfacer, repeat the surfacer until absolutely flat then top coat. If cast clean throughly, apply epoxy primer and topcoat. More complicated than I indicate. A lot of info in the archives.

Jr. Roby · Oct 27, 2012

where do u get picklex?

CNKS · Oct 27, 2012

autobodystore.com, possibly cheaper from the mfg, do a google search. Don't be concerned about the price--a quart goes a long way. I am about out of the last quart I bought maybe 7 years ago, obviously I don't need it very often.

bare metal

Jr. Roby

Member

CNKS

Well-known Member

Jr. Roby

Member

CNKS

Well-known Member

Similar threads