Brent in WI
Member
Started painting the John Deere today and that actually painted fine and in between coats I started painting the sheet metal with the same paint and it would not level at all creating a severe orange peel. The tractor was sandblasted, wipe down clean and then primed with epoxy primer and looks pretty good. Most of the sheet metal was sandblasted and primed the same way and I also had some pieces that we previously painted a few years ago but had a few runs so they were wet sanded, washed cleaned and dried with a lint free cloth. I used hardener for sythetic paints and just a little reducer like the can recommends. Looking for any suggestions. I'm also at a point of buying some more expensive paint for all the sheet metal but how do I get the paint to match up? Any reccomendatiosn would be much appreciated.
Thanks
Thanks