Author	[Modern View]
RJSw/NAA 10-08-2012 10:56:08 174.60.70.56 Report to Moderator	Since I am repainting and straightening the tin thought I should touch up the medallion while I am at it. The plating is blistered and dull. What is the best technique for restoring a like new finish without spending big bucks replating? Also I have never pounded out dents in tin before. Does anyone know of a good website showing dent repair on tractor tin? [Reply]   [No Email]
RJSw/NAA 10-10-2012 08:12:39 174.60.70.56 Report to Moderator	Re: medallion on Jubilee in reply to RJSw/NAA, 10-08-2012 10:56:08   Wow! That reproduction medallion makes mine look like crap. I"ll have to put it on my Christmas list.   [Reply]  [No Email]
soundguy 10-09-2012 18:43:45 107.41.151.193 Report to Moderator	Re: medallion on Jubilee in reply to RJSw/NAA, 10-08-2012 10:56:08   hit harbor freight and get the 17$ body dolly set. watch overworking sheet metal.. you can stretch the tim. in general.. a wide flat hammer or dolley and wood blocks are nice places to start   [Reply]  [No Email]
ShadetreeRet 10-08-2012 19:49:34 184.4.21.191 Report to Moderator	Re: medallion on Jubilee in reply to RJSw/NAA, 10-08-2012 10:56:08   Yesterdays Tractor has them for less than $45.00.   [Reply]  [No Email]
showcrop 10-09-2012 04:28:23 75.67.231.80 Report to Moderator	Re: medallion on Jubilee in reply to ShadetreeRet, 10-08-2012 19:49:34   ShadetreeRet said: (quoted from post at 19:49:34 10/08/12) Yesterdays Tractor has them for less than $45.00. Well that is good, but I could not find them on the site. I just looked again and found them. This post was edited by showcrop at 04:48:00 10/09/12.   [Reply]  [No Email]
showcrop 10-08-2012 16:58:00 75.67.231.80 Report to Moderator	Re: medallion on Jubilee in reply to RJSw/NAA, 10-08-2012 10:56:08   I think that the best technique for making the medallion look new is to throw it away and get a new one. Restoration Supply has them for $49.00.   [Reply]  [No Email]