Iseki 1910 start runaway

jacobmc2059 · Apr 27, 2018

Just started running away on first start. No maintence has been done to the engine or injection pump. Have no idea what to do or where to start. Help please grass is growing

thepumpguysc · Apr 28, 2018

Not Good..
The injection pump is supposed to be lubricated w/ engine oil that YOU add..
Somewhere between 2-5 oz of whatever you put in the engine..
There is a fill port on top & usually a "full" plug on the governor end..
Just google> iseki 1910 injection pump.. you'll find the answers..
You MIGHT get lucky & get it free but the damage might already be done..
If your in SC I could give you a hand.. I've freed up MANY that were stuck, ON the tractor..

jacobmc2059 · Apr 28, 2018

(quoted from post at 03:20:29 04/28/18) Not Good..
The injection pump is supposed to be lubricated w/ engine oil that YOU add..
Somewhere between 2-5 oz of whatever you put in the engine..
There is a fill port on top & usually a "full" plug on the governor end..
Just google> iseki 1910 injection pump.. you'll find the answers..
You MIGHT get lucky & get it free but the damage might already be done..
If your in SC I could give you a hand.. I've freed up MANY that were stuck, ON the tractor..

This is what i was afaid of. I knew it need oil but i lost track of when it was done last. I will see what i can do. Not alot of info on these tractor. Thanks of the info. I can fill at the breather and the drain is below that and see where it goes

Iseki 1910 start runaway

jacobmc2059

New User

thepumpguysc

Member

jacobmc2059

New User

Similar threads