Anonymous-0
Well-known Member
1> Yesterday, I bought a Hough Payloader Paylomatic H25. I don't know what year is it, and I can't find a label. The previous owner(s),
apparently, claim it ran and they drove it into the building where it sat.
2> It's a diesel. With ether, it acts like it might run, but it doesn't seem to get fuel. There is fuel from the pipe to the injector/punp (I/P), I guess it is, but it doesn't come out of the I/P at the pipe to the cylinder.
3> With a cover off the rear of the I/P, on the left rear of the motor near the radiator fan at the rear of the machine, a round, concave thing, about the size of the cover, can be seen rotating. I suppose that means the I/P seems is getting drive-power. There is a rod with spring-pressure sticking out of the middle of the round, concave thing, which fits into or has worn a round, shallow hole into the inside of the cover. I have no idea for what is the rod.
4> Has anyone a manual for the old beasty, or advice or knowledge about what should I try next?
5> Where could I get parts to rebuild the injector, if that's what it needs?
apparently, claim it ran and they drove it into the building where it sat.
2> It's a diesel. With ether, it acts like it might run, but it doesn't seem to get fuel. There is fuel from the pipe to the injector/punp (I/P), I guess it is, but it doesn't come out of the I/P at the pipe to the cylinder.
3> With a cover off the rear of the I/P, on the left rear of the motor near the radiator fan at the rear of the machine, a round, concave thing, about the size of the cover, can be seen rotating. I suppose that means the I/P seems is getting drive-power. There is a rod with spring-pressure sticking out of the middle of the round, concave thing, which fits into or has worn a round, shallow hole into the inside of the cover. I have no idea for what is the rod.
4> Has anyone a manual for the old beasty, or advice or knowledge about what should I try next?
5> Where could I get parts to rebuild the injector, if that's what it needs?