251265 Chrysler Flat head

Earl-IL · May 31, 2012

Does the 251 & 265 Chrysler flat head have the same bolt pattern on the bellhousing?? Thanks Earl

VicS · May 31, 2012

Not a big expert but we have a 230 in a Custom, and a 265 is supposed to be a bolt in deal. They made a 413-6 cyl- flathead. don't know if it is the same, probably not. Vic

VicS · May 31, 2012

Not a big expert but we have a 230 in a Custom, and a 265 is supposed to be a bolt in deal. They made a 413-6 cyl- flathead. don't know if it is the same, probably not. Vic

greygoat · Jun 1, 2012

If you are asking about "Chrysler Industrial"
the engine to bellhouseing bolt pattern, and thread size are the same..but bellhouseing to
transmission pattern could be different as these
industrial engines were made to different
customers applications. Also, there are SAE,
(Society of Automotive Engineers) Standard,
bellhouseings, SAE#1,SAE#2, etc..see an SAE
handbook for deminsions. (Library,or Google)

Anonymous-0 · Jun 2, 2012

Are you dealing with American made or engines made in Canada? There are some differences between those

Earl-IL · Jun 2, 2012

I am checking for a friend. I haven't looked at them. The 251 was in a Wards tractor (locked up) & the 265 (good running} is in a old mobile crane set up on LP . Thanks Earl

Anonymous-0 · Jun 2, 2012

If your friend have a wards tractor either whole or parts looking for one. Thanks email open

251265 Chrysler Flat head

Earl-IL

Well-known Member

VicS

Well-known Member

VicS

Well-known Member

greygoat

Well-known Member

Anonymous-0

Well-known Member

Earl-IL

Well-known Member

Anonymous-0

Well-known Member

Similar threads