Moline_guy
Well-known Member
White 2-155, early model.
Parked tractor late last fall and all was good, went to move it and it won't go into any gear. Shift lever moves freely through the nuetral positions and side to side but won't drop into gear. The park lever
does not come all the way back, it is about 1/2 inch away from touching the counsel, I don't remember if it was always this way or not. I jacked up one side, and wheel spins with park lever back and locks when
park lever is ahead. I noticed where the park shaft goes into the top of the transmission, it moves up and down a bit. I have never wiggled on it before if this is normal or not. Any ideas on what is going
on? Thanks for any help or information.
Parked tractor late last fall and all was good, went to move it and it won't go into any gear. Shift lever moves freely through the nuetral positions and side to side but won't drop into gear. The park lever
does not come all the way back, it is about 1/2 inch away from touching the counsel, I don't remember if it was always this way or not. I jacked up one side, and wheel spins with park lever back and locks when
park lever is ahead. I noticed where the park shaft goes into the top of the transmission, it moves up and down a bit. I have never wiggled on it before if this is normal or not. Any ideas on what is going
on? Thanks for any help or information.