Vickers SP212


The control lever and linkage for the remote cylinder on my 550 is worn out. Does anyone know if parts are available ? It is a Vickers SP212 on a 1959 550.
Thanks, Harry
 
Thanks for the info. They couldn't help me with the lever and linkage but it is good to know they are there in the future. I found a machinist here locally that can help me.
Thanks again, Harry
 
I actually need an O-ring kit for this same valve. Anyone have any ideas? I went to my local hydraulic shop and of all the O-rings they had they couldn't match a single one up...
 
I went to our local Eaton dealer looking for Cessna pump parts. They own Vickers too. They were able to pull up the schematics and called their HQ to verify the seal I needed was no longer available. If you have a dealer somewhat local, I'd try that, or just call and see what they say.
 
I went to our local Eaton dealer looking for Cessna pump parts. They own Vickers too. They were able to pull up the schematics and called their HQ to verify the seal I needed was no longer available. If you have a dealer somewhat local, I'd try that, or just call one and see what they say.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top