2150 restoration cost?

To Cold to do much so I totaled all the recites I could find from 2150 restoration, from radiator to 3
Point. This is just for parts and paint, no labor. This includes the tractor that I paid 10 grand for too start with. If anyone comes within 500$ of my recites I will tell what I have in it. Dieseltech don't answer because I think I told you.
 
Tractor--$10000, parts and paint--$7355--Total--$17355--Can I have your address so I can send my check?---Tee
 
Having trouble getting pictures to load tonight. Try again
a252737.jpg
 
Your 7355 just bought the tires ,rims, hubs and wedges. PS, the oil stain on the floor in the picture is from a JD 4020.
 
My 1855 cost $25,000 starting with a $3,500 tractor. I would put yours at least $30,000 and more would not surprise me. It's much nicer than my 1855. Did you plow with it at HCOP show?
 
(quoted from post at 03:49:50 01/04/18) My 1855 cost $25,000 starting with a $3,500 tractor. I would put yours at least $30,000 and more would not surprise me. It's much nicer than my 1855. Did you plow with it at HCOP show?



OK I will take a stab at it, for the 2150, $52,985.79
 
No I never. It is turned out too nice to put it in the dirt yet. Also I don't have the 566 plow with a true on land hitch restored yet. I want to take it to a few shows this summer while it is still looks this good. Also I have to blast the front spacers, paint, and install them so the front tires follow the rears. Also am going to get the original gauges and tach restored when I have some extra money. Don't have a lot of faith in the aftermarket ones I have on the tractor now.
 
(reply to post at 18:55:31 01/03/18)

Very nice Larry
I’ve never done an Oliver but have done other brands
It always cost more than I think but I’m going
To say you have a total of $44,750 in it
Thanks for sharing
Dugger
In Illinois
 
Larry, regardless of the cost your restorations are the best I've ever seen by far. Top notch work please keep us posted on the backhoe project.
 
No I don't, nor do I want one. I want a late model Oliver 1850D. The man I work for farming has a couple 4020"s. Here is a picture of his with a narrow front that we restored and the neighbors with a wide front I restored.
a252818.jpg
 
As long as you are pleased with it is all that matters. You do beautiful work by the way.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top