Oliver Side Panel Knobs

At the risk of getting spoofed for advertising, I made some side panel knobs for Larry's 2150 and some of our Olivers because I don't like the quality of the remakes that are currently available. If enough others would be interested in a set for their tractors that would justify me setting up a machine and running a group, then I would make some more. Here are a couple of pics, I can make them with (hipsters) or without(purists) the Oliver emblem. They are made out of stainless, so they won't rust prior to getting your tractor to its first show. Apologies to the moderator if this is not allowed, if that's the case then just delete it. Thanks.
2912.jpg
2913.jpg
 
Those are good looking. I have had them rusted in place for not being removed often. What kind of price? Email not open?
 
These knobs are like putting a scoop of ice cream on a piece of apple pie. They really dress up the side panels. Thanks again mitch.
 
I'd probably need about 10 bucks per knob for it to make sense, I think there are either 4 or 6 per four digit tractor. Free shipping to the lower 48. The part number for the knob is 166205A. The cheap ones are about 7 bucks I think, so hopefully this isn't unreasonable. It needs to make a little bit of sense for me to set a machine up for this. You can get ahold of me through our shop website www dot PPMach dot com.
 
nice...if I was looking for some and they didn't make everything else scream for attention.

10 bucks would end up...ask Larry :)
 
I am interested in your knobs, 1-2150, 1-1550 and I thimk they might work on c model 1800 have to check
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top