Oliver 310 crankshaft

mrashwood · Jul 14, 2017

I have a crankshaft for a 310 engine. I measured the journals with a digital caliper and I think it could be fixed up. My question is, do I need to take it to a machine shop so they can measure it? Do I need to have it ground before I sell it for it to be worth any money? I don't know what it would cost to have fixed or what it would be worth after its ground.

Geoff in KS · Jul 14, 2017

I would have it checked at a machine shop before I advertised it as a good crankshaft.

J. Schwiebert · Jul 14, 2017

Get it checked. If it needs to be ground and it goes through the hardening sell it as a gas crank. They may want to have it welded up for a stroker crank!

mrashwood · Jul 14, 2017

Thanks, guys! I will have it checked. I wouldn't trust my measurements if I was buying it! I know they are hard to come by, so hopefully it will be worth it.

Oliver 310 crankshaft

mrashwood

Member

Geoff in KS

Member

J. Schwiebert

Well-known Member

mrashwood

Member

Similar threads