Oliver 1650 Diesel Needs Loader

CWL

Member
Hello all. I purchased an Oliver 1650 diesel Saturday and am in the process of looking for a loader for it. I have a couple of questions for the experts on here.

Will the information rrlund posted for the 1655 hydraulic plumbing apply to the 1650 as well?

I have found a quick attach loader advertised with mounting brackets for an Oliver 1850. How much difference is there between mounting dimensions between the 1650 and the 1850?
 
Plumbing should be the same. Only difference in mounting pads should be the distance from the rear axle to the back hole in the rear pad.
 
Thank you rrlund. The loader I'm looking at appears to mount to the sides back by the clutch area and in the front. It doesn't look like it has any bracing that goes to the rear axle.
 
The mounting pads should the same.I had a loader on my 1855 and I transpherd them over to my 1650 this was a westendorf loader.
 
Thank you for the information ejr-ia. The loader I'm looking at is about a 4 hour drive each way so this is good information to have before making that long trip.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top