Replacing mechanical lift pump White 2-85

I'm thinking about replacing the mechanical lift pump on my 2-85 with an electric one. Nothing is wrong, yet, with the mechanical pump, but I don't want to fill the crankcase with fuel either. Done that before on other machines.

Have any of you done this? I'd like it to look relatively decent, as I can easily start cutting lines and make something fit. Was curious on any of you that have done this to make it look good.

Thanks for any advice, suggestions.
 

Ok, here's the block I made to cover the hole.

45724.jpg



I couldn't get a photo of the electric pump, but it is mounted inside of the side shield behind the pulley and plumbed to the filter.

45725.jpg


I hope this gives you a idea.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top