1650 fenders

MikeinKy

Well-known Member
What fenders will work on a 1650? I have a real nice tractor with junk fenders. I have been told that they had to be from a 1600, 1550, or
1650. I am not an Oliver expert, although I like them. This tractor has very low hours. The previous owner could tear up an anvil. They
bushhogged with it some, and if a tree was in the way if it could be ran over, it was. That is hard on fenders.
 
The 770 and 880 flat top fenders will work also. Travis Trent Fabrication in Tenn. makes them for pulling tractors that look great. I have seen some on Ebay and they can get expensive. I had a body shop bang the dents out and straighten my 77 fender and hood and cost over $200. White 2-70 fenders will fit also just look different.
 
I figured they would be cheaper, lol! I never cared for the design but totally ugly without them. I had to pull everything that would come off to make the #8500 class. I should of left it home anyway! My White American got second in the #7500. I think the American fenders would fit but they are quite rare.
a149417.jpg

a149421.jpg
 
Friend of mine put 88 fenders on his 2255 puller also has narrow front. Thought I had a pic but came across this one instead. These fenders might fit!
a149426.jpg
 
Nice. I want to do that to a 1550 or 1600. Narrow front,13.6 rears,clamshell fenders. Some day.
 
I probably have some extras in central Minnesota. I hear they are harder to find but I haven't had much trouble finding them. I buy them whenever I see them just incase I need them some time.
 
Bret, You found me! I just got home from plowing snow and I'm going to jump on that tractor and clear the driveway. I have another YT video under Walton Fair tractor pull. Same tractor but different 1650 engine and video was shot in 1994.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top