2-105 throttle

rrlund · Dec 9, 2016

Where is the friction disc for the throttle lever in a 2-105? Mine was slipping so bad today that by the seventh load of manure,I had to hold the lever with one hand.

Lee Wegner · Dec 9, 2016

Remove left side panel it's under the fuel tank where the throttle rod from the injection pump hooks up.

rrlund · Dec 9, 2016

Will do. Thanks. Easier than having to get in to the dash if it was in there.

rrlund · Dec 12, 2016

That's different than the older Olivers. Takes a 9/16ths wrench and has a lock nut. Easier to get to though. I kinda overdid it without really trying. Got it kind of stiff,but it'll wear in.

OLWHDA · Dec 13, 2016

That friction deal on my 1975 2-105 is temp sensitive , seems like I'm always adjusting it, a little bit of adjusting goes a long ways.

rrlund · Dec 13, 2016

Ya,this one was OK until the bottom fell out of the thermometer. I thought maybe after it ran a while and got some heat built up it might help,but it didn't.

2-105 throttle

rrlund

Well-known Member

Lee Wegner

Member

rrlund

Well-known Member

rrlund

Well-known Member

OLWHDA

Member

rrlund

Well-known Member

Similar threads