Oliver 1610 loader question.

Rusty Knuckles · Sep 30, 2016

I have a 1610 loader that I am putting on a 1600. But the axle end doesn't have any way to bolt up. Can someone post a picture of a factory set up on how they are supposed to look so that I can fabricate something.

Thanks.

Don-Wi · Sep 30, 2016

The tubes that go to the rear are held on with a plate and long bolts. I have that exact setup, a 1610 on a 1600. There should also be a spacer for each side on the tub. I don't have those so I used a stack of washers.

Donovan from Wisconsin

greg oliver · Sep 30, 2016

In the search box at the top of the page put Oliver 1610 loader brackets. I had posted some pics for Shep in Florida. I still have the loader if you need any more pics.

Rusty Knuckles · Sep 30, 2016

Thanks guys,
Chunk of channel and some threaded rods.

Thanks.

farmerwithmutt · Oct 1, 2016

A big plate with the right holes worked for
me

gary66 · Oct 2, 2016

same loader I have on mine. Found a manual on Ebay.

Oliver 1610 loader question.

Rusty Knuckles

Member

Don-Wi

Well-known Member

greg oliver

Well-known Member

Rusty Knuckles

Member

farmerwithmutt

Well-known Member

gary66

Member

Similar threads