I am trying to remover the shaft that drives the PTO. Got the cover off and the snap ring, stub shaft and O-Ring out. Pulled the shaft out about 12 inches and it will not come any further. Have rotated the PTO shaft, the long shaft I am trying to remove, and the engine, but no luck. It will come no further.
What am I missing? I have a 1/2 threaded rod to pull the shaft with a slide hammer attached. Seems to vibrate a little when I slide the hammer.
I would appreciate any advice. I know somewhere on this site this has been discussed before but I can't seem to search for it and find the information.
What am I missing? I have a 1/2 threaded rod to pull the shaft with a slide hammer attached. Seems to vibrate a little when I slide the hammer.
I would appreciate any advice. I know somewhere on this site this has been discussed before but I can't seem to search for it and find the information.