Center frame to forward frame mate?

ol 55'

Member
Thought the ol 55 would just line up upon joining bothe frames and that ol saying a Piece of Cake failed me. I within a 1/2" or less from bolting her up. I'd used the eng. clutch shaft to line up the disc and the pressure plate itself is bolted to the fly wheel which in thery can only be lined up with 6 bolts for the hollow tube. Don't know what is keeping the frames from goung together. I've got all 4 5/8 bolts started 2 on each side. Ive rotaded the flywheel a little put the trans in gear, pushed on it back in forthe, not quite sure whats holding her up, don't want to do anything stupid at this here point, like tighten the hell out of those there5/8 bolts or something. Need a little bailout here farmers. :?: Its my oliver 55.
 
With out a doubt you made my day there rrlund. Did exactly what you told me and she's back together, next top transmission housing along with a few other things. Thanks a lot there, your the Man.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top