1550 Hyddrapower leak, repost with pic

Mike(NEOhio) · Nov 8, 2015

I made this line up to replace the one the PO put on. Larger diameter and new elbows. It leaks from the round

Mike(NEOhio) · Nov 8, 2015

Sorry, clicked the wrong button before I finished. The leak is from the round piece that the upper elbow is screwed into. That piece also vibrates. How can I fix this? JS, want to weigh in?

cobroller · Nov 8, 2015

You have to remove the side cover & replace the oring on the banjo.

J. Schwiebert · Nov 8, 2015

You asked me if I wanted to weigh in. If you keep the weight. You feel lucky today? It will only leak there in direct drive. Send me an e-mail.

Mike(NEOhio) · Nov 8, 2015

Email sent but I'm not sure if it got out. Let me know if you don't get it.

Mike(NEOhio) · Nov 8, 2015

Thanks, I could never figure out what that round piece is. When you said "banjo" I was confused. Then I checked the parts book and along with John's comment it all became clear. Can that cover come off without pulling it out of the frame? The lower screws are close to the frame.

cobroller · Nov 8, 2015

I don't think so-the oil pump is bolted to it

1550 Hyddrapower leak, repost with pic

Mike(NEOhio)

Well-known Member

Mike(NEOhio)

Well-known Member

cobroller

Member

J. Schwiebert

Well-known Member

Mike(NEOhio)

Well-known Member

Mike(NEOhio)

Well-known Member

cobroller

Member

Similar threads