bore and stroke question

fastfarmall

Well-known Member
My brother in law, got his 44, 80 standard running , he was at the plow day yesterday[Sunday}pulling his 3x14 rooster comb plow, Just curious what the bore and stroke on that is? He plowed a long time on that little gas tank.
 
   From the factory, the 80 standard (as was the row crop) 4.250" bore, 5.250" stroke.   The KD engine had a larger bore of 4.500".   Both rated speeds were 1200 RPM.
 
Ok, thanks,I suppose you knew it, but the clutch pedal in on the right side, and only one hand brake, is on the left.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top