80 880 sleeves and pistons

KenL · Sep 7, 2015

If someone can use these, they can have them for scrap price. 880 5 used sleeve sets. There is a very small ridge in the sleeves. Pistons look good. Tractor didn't use any oil. #6 scored. 80 4 sleeve sets. This engine was set tight. There isn't much wear on the sleeves but, they are pitted in spots and also chipped on the bottom from removing them. Possibly good enough for a show tractor. Pistons look OK but the rings are stuck. If nobody wants them, they will go for scrap. Just thought I would see if anyone could make use of them before I toss them. They are located 45 SW of Green Bay Wi. near Dale. I don't want to ship. Prefer pick up. Monday they will be scrapped.

Bear Creek Majors · Sep 7, 2015

Hi Ken I'm new to the Olivers but I need one sleeve and piston for a 1650 and the bore is the same, can anyone tell me if these are interchangeable?

Pat

oliver90owner · Sep 8, 2015

A tip for stuck piston rings. Soak in diesel for a while, then stand/hang/place them in front of a diesel /kero shop heater and wait for the rings to spring open as the piston gets to a high temp. Often works a treat, even if the rings are found to be worn out. Prolly work in an oven just as well.

J. Schwiebert · Sep 8, 2015

They do not interchange

80 880 sleeves and pistons

KenL

Member

Bear Creek Majors

Member

oliver90owner

Member

J. Schwiebert

Well-known Member

Similar threads