White 2-105 Shifter Binding

Part Time Pete

Well-known Member
I've been having some issues with the shifter on my 2-105 - lately it's been binding, then today it got to where it won't go into second gear. It'll go in partially, but not enough to stay. Any thoughts/suggestions?
Thanks
Pete
 

How does the clutch pedal feel? Perhaps the binding is due to a load still being applied to the gears from the engine (if the clutch isn't fully disengaging). It's a simple check/adjustment and could rule out a potential issue.
 
The clutch seems to be working OK. Another thing it did was when I stopped to check on the baler, I popped it out of third gear, started to let out the clutch and it was still in gear. After some fiddling back and forth between third and reverse, I got it to neutral
Is there top access to that transmission, to possibly see if something's bent of broken, or does it have to come apart?
Pete
 
You could have a shift fork that has come loose or cracked. You can get the top cover off and see the shifters, it takes some doing , you have to fight the hyd lines. If something has happened to a shift rail you will have to remove the rockshaft housing and possibly the engine. Hope its loose or missing bolts, make sure you loctite them!
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top