1550 PTO clutch

The whole clutch and release bearing assembly. I haven't measured anything but it's at least 1/8 inch. I know it will never be dead on the way it hangs out off the flange. I was wondering if I should try to straighten it some. When I had it apart I checked the housing halves with an indicator on a ground plate. They looked pretty good. I'm going to try the cover in all three positions and see if it makes a difference.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top