transmission gasket 550 oliver

Way cheaper to buy a sheet of gasket material and make your own.
An alternate way to replace a gasket is to clean both mating surfaces with brakeclean and draw a single 3/16 to 1/8" bead of black RTV silicone in the center of the rail and surrounding all bolt holes with a little less and bolt the 2 together hand tight, wait an hour and torque to specs, let it cure overnight before exposing it to oil.
garanteed never to leak again.
Problem with using silicone is that people use way to much which results in most of it ending up inside a tranny or engine where it can cause problems.

A little goes a long way.
 
Jerry at Ag Parts First has them. 330-264-9720. It takes two of them, one under and one above the pan for the hydraulic system.
 
(quoted from post at 11:37:46 06/08/15) is there anyone who sells transmission gasket for 550 housing to hydraulic housing?
Gaskets are available at Agco dealers parts depatrments. I would not take a chance with such critical gaskets because a failure would cost a lot to redo. The hydraulic system module upgrade is a labour intensive repair, with heavy weight lifting :lol:
 
(quoted from post at 04:16:43 06/12/15)
(quoted from post at 11:37:46 06/08/15) is there anyone who sells transmission gasket for 550 housing to hydraulic housing?
Gaskets are available at Agco dealers parts depatrments. I would not take a chance with such critical gaskets because a failure would cost a lot to redo. The hydraulic system module upgrade is a labour intensive repair, with heavy weight lifting :lol:

do you know the part number for this gasket?
 
(quoted from post at 13:21:43 02/08/18)
(quoted from post at 04:16:43 06/12/15)
(quoted from post at 11:37:46 06/08/15) is there anyone who sells transmission gasket for 550 housing to hydraulic housing?
Gaskets are available at Agco dealers parts depatrments. I would not take a chance with such critical gaskets because a failure would cost a lot to redo. The hydraulic system module upgrade is a labour intensive repair, with heavy weight lifting :lol:

do you know the part number for this gasket?

Agco part # E2003 gasket, after tractor S/N 6050
 
(quoted from post at 18:17:53 02/08/18)
(quoted from post at 13:21:43 02/08/18)
(quoted from post at 04:16:43 06/12/15)
(quoted from post at 11:37:46 06/08/15) is there anyone who sells transmission gasket for 550 housing to hydraulic housing?
Gaskets are available at Agco dealers parts depatrments. I would not take a chance with such critical gaskets because a failure would cost a lot to redo. The hydraulic system module upgrade is a labour intensive repair, with heavy weight lifting :lol:

do you know the part number for this gasket?

Agco part # E2003 gasket, after tractor S/N 6050

thank you. I also found it from here as well.

http://agpartsfirstllc.mybigcommerce.com/hydraulic-housing-gasket-e2003/
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top