jeep_boy02
New User
Was ready to sell my 1850 and went to start it up to unhook the brush hog and noticed the loader creeping up, at a pretty steady pace. Not full speed but I popped the hydraulic cover off and found the main arm control lever had broken the Spacer/Key deal that locates the arm on the inside of housing. I replaced that and the gasket, put it all back together and its doing the same thing... I do notice now that the control levers are not matched up like they used to be but I had the arm on the inside of housing lined up.
Is it something spring and valve wise needing replaced or just not lined up?
What is the best way to empty the fluid when my loader wants to rest at full up???
Is it something spring and valve wise needing replaced or just not lined up?
What is the best way to empty the fluid when my loader wants to rest at full up???