1655 fuel delivery

jude116057 · May 15, 2015

i apologize in advance for all the questions i have and will be posting but i would rather ask and learn from experience than make costly mistakes by shooting from the hip. i am considering installing a fuel pump and filter combo and eliminating the sedimant bulb and glass fuel filter i currently have. what psi is ideal for feeding the roosa master. i realize they have the ability to deal with this issue internally but would hopefully eleviate some stress on the i.p.??

Dieseltech · May 15, 2015

5 to 7 PSI would be fine. With good filter service though no supply pump is needed. Several makes and models never had supply pumps, some even had the fuel tank below the injection pump and still worked fine if all lines and fittings are in good condition..

J. Schwiebert · May 16, 2015

What do you have in mind for filters? The older 1655 did have filters. What micron rating are you thinking of using>

1655 fuel delivery

jude116057

Member

Dieseltech

Well-known Member

J. Schwiebert

Well-known Member

Similar threads